IRF Posted July 15, 2016 Report Share Posted July 15, 2016 (edited) JSW disassembly 'Display the title screen...': the side comment at #8820-8827 - it might be worth pointing out that 'DE' isn't defined here, in advance of the LDIR command at #8826 - but that's because it has been left with an 'initial' value of '#5800 (pointing at the attribute file) by the operation of the previous LDIR loop (#8813-881F) that cleared the display file! Edited July 18, 2016 by IRF jetsetdanny 1 Quote Link to comment Share on other sites More sharing options...
IRF Posted July 25, 2016 Report Share Posted July 25, 2016 9D00 in the JSW disassembly: 'Willy sprite graphic data' - perhaps you could mention that one of the sprites is used by the 'Display the game over sequence' at #8C4A? Quote Link to comment Share on other sites More sharing options...
SkoolKid Posted July 28, 2016 Author Report Share Posted July 28, 2016 (edited) Just checking in to acknowledge the comments and see what new stuff I should be adding to my MM/JSW disassembly TODO lists! :) I've been preoccupied recently with SkoolKit 5.3 and the Spectrum ROM Disassembly, but I'm going to take a break from those and concentrate on MM and JSW for a bit. Now, where were we the last time I was here... Edited July 28, 2016 by SkoolKid IRF, jetsetdanny and Spider 3 Quote Link to comment Share on other sites More sharing options...
IRF Posted July 28, 2016 Report Share Posted July 28, 2016 (edited) Just checking in to acknowledge the comments and see what new stuff I should be adding to my MM/JSW disassembly TODO lists! :) I've been preoccupied recently with SkoolKit 5.3 and the Spectrum ROM Disassembly, but I'm going to take a break from those and concentrate on MM and JSW for a bit. Funny you should mention the Spectrum ROM, I've been experimenting recently and a familiar shape has popped up - see if you recognise it from the attached screenshot (the Black thing at the top-centre of the screen)... Also, you might be able to answer a query I had a while ago about the area of the 'contended memory' #5B00-5BFF. The 'top end' of it seems to be used for the stack addresses in JSW (starting at #5BFE-FF), but does it have any other use than that? #4000-#57FF is the display file, #5800-#5AFF is the attribute file, and the JSW buffers begin at #5C00 - so 'page' #5B fits in between those. Now, where were we the last time I was here... I came round to your way of thinking on Willy's Jumping Animation Counter (when he makes a quirky jump 'Through the Wall') and the way the Rope Animation Table works (in calculating the offsets of each Rope segment) - although I had a couple of suggestions for 'clarifications' in the Trivia entry for the former, and the introductory text for the latter - and I've bombarded this thread with a host of other ideas since! Edited July 28, 2016 by IRF Quote Link to comment Share on other sites More sharing options...
IRF Posted July 28, 2016 Report Share Posted July 28, 2016 (edited) Richard, I've just noticed that neither of the two 'Kong Beast' screenshots in the MM disassembly display the Cyan horizontal guardian!? Also, the comment at #91EE caused me momentary confusion; perhaps it should read: "The Kong Beast is drawn with Yellow Ink when he is falling"? Edited July 28, 2016 by IRF Quote Link to comment Share on other sites More sharing options...
SkoolKid Posted July 28, 2016 Author Report Share Posted July 28, 2016 Also, you might be able to answer a query I had a while ago about the area of the 'contended memory' #5B00-5BFF. The 'top end' of it seems to be used for the stack addresses in JSW (starting at #5BFE-FF), but does it have any other use than that? #4000-#57FF is the display file, #5800-#5AFF is the attribute file, and the JSW buffers begin at #5C00 - so 'page' #5B fits in between those. As far as I know, the printer buffer (5B00-5BFF) is used only by the stack - the stack pointer being 5C00 when the game starts. Richard, I've just noticed that neither of the two 'Kong Beast' screenshots in the MM disassembly display the Cyan horizontal guardian!? Also, the comment at #91EE caused me momentary confusion; perhaps it should read: "The Kong Beast is drawn with Yellow Ink when he is falling"? Regarding the cyan guardians in the Kong Beast caverns: well, well, well! My first thought is that because the third horizontal guardian in those caverns is unused, the fourth one (the cyan one) is erroneously skipped. I will look into it... Regarding the comment at 91EE: the comment at the beginning of that section of code (at 91A3) says "The Kong Beast is falling", but I suppose you might have forgotten that by the time you reach 91EE. :) IRF 1 Quote Link to comment Share on other sites More sharing options...
IRF Posted July 28, 2016 Report Share Posted July 28, 2016 N.B. The Cyan 'Kong caverns' guardians are present when you play the game! Quote Link to comment Share on other sites More sharing options...
SkoolKid Posted July 28, 2016 Author Report Share Posted July 28, 2016 N.B. The Cyan 'Kong caverns' guardians are present when you play the game! Oh, I know that - what I meant was that they are erroneously skipped by my cavern-drawing code. I don't know if I've mentioned this before, but none of the images in my disassemblies are derived from in-game screenshots - they are all programmatically generated. IRF 1 Quote Link to comment Share on other sites More sharing options...
Spider Posted July 28, 2016 Report Share Posted July 28, 2016 Slightly off topic but I like the ROM Disassembly. :) Having read the book about it, the info you've provided (from what bits I've looked at so far) are very helpful. jetsetdanny and IRF 2 Quote Link to comment Share on other sites More sharing options...
IRF Posted August 5, 2016 Report Share Posted August 5, 2016 (edited) The Encroaching Rope:I believe that a Rope's data spilling beyond its alloted eight bytes in the Entity Buffer, falls firmly into the 'Bug' rather than 'Trivia' category. Furthermore, placing a Guardian directly after a Rope in a room's Entity List can potentially cause corruption through the game code, in a similar way to the Attic Bug! May I humbly suggest that your JSW disassembly could provide the POKEs that implement the Adjacent Ropes Patch (assuming the prior, kind permission of John Elliott for such, of course!)?Ropes before Arrows:This Trivia entry could perhaps point out that this scenario is sometimes, but not always, fatal to Willy. (Depending on whether the Arrow and Rope have sufficiently diverged in the next time-frame, when Willy's sprite is first drawn on the Rope.)Also, if the Arrow's pixel y-coordinate is such that it passes between the Rope's segments, then a pixel-collision might not take place, in which case 'teleportation' would be avoided! Edited August 10, 2016 by IRF Spider and jetsetdanny 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.