DigitalDuck Posted August 23 Report Share Posted August 23 6 hours ago, Jet Set Willie said: How I can SAVE with LINE in ZX BASIC? When I type SAVE "name" LINE 10 it brings SAVE "name" ?LINE 10 It should just be as simple as that. Are you in 48K BASIC and not using the keyword (EXTEND mode, symbol shift+3)? Spider 1 Quote Link to comment Share on other sites More sharing options...
Jet Set Willie Posted August 24 Author Report Share Posted August 24 Yes, in 48K BASIC. I just typed it. As you mentioned EXTEND mode, I tried that and it brings the same result, SAVE "name" ?line . Spider 1 Quote Link to comment Share on other sites More sharing options...
Jet Set Willie Posted August 24 Author Report Share Posted August 24 Is it possible to save with the start line number in ZX-Editor or ZX-Block Editor? I think it should be possible as there are so many options there, but I didn´t find it. Quote Link to comment Share on other sites More sharing options...
Norman Sword Posted August 24 Report Share Posted August 24 (edited) Not a program I use or need. (zx block editor) so curiosity. click on the block that needs editing - in this case (in this example) double click on the 3rd entry "PROGR" etc This will bring up the part that says "Edit datablock" On this example you can see highlighted the basic "autostart line" Click on the line number and edit to the line wanted ---- I found the output visuals confusing, but just insert the line number you want and then press enter The inputed data should take the form of the line number and also highlighted will be (on the lower line of the "EDIT datablock") will be the option OK or cancel. When you press "ok" the line that is the block - in this case block 3 - will be changed to highlight the new start line number. Edited August 24 by Norman Sword Adding picture. jetsetdanny, Spider and Jet Set Willie 1 2 Quote Link to comment Share on other sites More sharing options...
Spider Posted August 24 Report Share Posted August 24 Should not need to repeat the CLEAR 🙂 With ZXBasic its extended mode (assuming 48K Basic) then symbol shift and 3 together to get the keyword LINE With ZXEDitor (block editor anyway) you can choose a type of header "compose datablock" and pick either tzx or tap to match and choose "program autostart header" instead of "program header" I did see some files you sent a while ago but due to (other issues) I can't process multiple copies of things at the same time 😞 One "full" tape file and I should be able to sort it. jetsetdanny and Jet Set Willie 1 1 Quote Link to comment Share on other sites More sharing options...
Jet Set Willie Posted August 26 Author Report Share Posted August 26 Thank you, Norman and Spider! I had forgotten that. The second program works now 🥰 so the whole game works. 🙂 The problem with the LINE was that I have used Klive emulator. When I go to extended mode and press symbol shift and 3 together, it goes to K mode. I tried ZXSpin now, it brings me LINE. 😀 jetsetdanny and Spider 1 1 Quote Link to comment Share on other sites More sharing options...
Spider Posted August 30 Report Share Posted August 30 So we can see it soon ? 🙂 JianYang 1 Quote Link to comment Share on other sites More sharing options...
Jet Set Willie Posted August 30 Author Report Share Posted August 30 As soon as JetsetDanny has time to test play it. 🙂I have tested it through many times, I hope he won´t find anything what needs a big change in some room. 😄 Spider 1 Quote Link to comment Share on other sites More sharing options...
jetsetdanny Posted August 31 Report Share Posted August 31 I will be happy to playtest it, but it will be a few days before I'm able to get down to it. I'll do my best not to keep you waiting for too long 😉 . Spider and Jet Set Willie 1 1 Quote Link to comment Share on other sites More sharing options...
Spider Posted September 1 Report Share Posted September 1 Is there any unused space in the game code ? As in , you've not used much of the dead space within the game itself ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.