Metalmickey Posted December 16, 2017 Report Share Posted December 16, 2017 i guess i could start again with a new theme "Jet Set Willy at the Overlook Hotel" .. maybe i'll have it completed by Halloween next year... Quote Link to comment Share on other sites More sharing options...
Spider Posted December 16, 2017 Author Report Share Posted December 16, 2017 Well one of the reasons as to why my 256 room project has been all but abandoned shelved is because i didn't begin any sort of play-testing until i was about 120 or so rooms in, then when loading it into various emulators that i have at my disposal the game loads ok but after pressing Enter to start it just crashes and resets .. i'm currently waiting on delivery of a 128+3 so i am going to try it out on that when it arrives... Long shot but try loading it first with the 'Tape Loader' (so its 128K mode) , if it still crashes: Don't switch to 48K mode in the menu, instead enter 128K Basic and either type in SPECTRUM or USR 0 to reset it to 48K mode, this should still leave ( ! ) the 128K memory and facilities available. It should be recoverable though, were you manually using the hex editor ? :unsure: Metalmickey 1 Quote Link to comment Share on other sites More sharing options...
jetsetdanny Posted December 16, 2017 Report Share Posted December 16, 2017 (edited) Well one of the reasons as to why my 256 room project has been all but abandoned shelved is because i didn't begin any sort of play-testing until i was about 120 or so rooms in, then when loading it into various emulators that i have at my disposal the game loads ok but after pressing Enter to start it just crashes and resets .. i'm currently waiting on delivery of a 128+3 so i am going to try it out on that when it arrives... Metalmickey: I am positive that since you've put so much work into the project already, one way or another we will figure out what the problem is (asking John Elliott for help as a last resort). For the time being, could you tell us which is the starting room (room number in JSWED)? If it's above 33 or so, try moving it to a lower number. Or just try setting the starting point to a safe location in room 00 or 01. Have you tried that by any chance? I am asking because I remember in the past there was a problem with starting rooms "above" a certain number. You could also send me the file (e.g. uploading it here in a new PM thread, if you want, or straight to my e-mail address visible here) and I would have a look at it to see if there is anything I can do about it :). Edited December 16, 2017 by jetsetdanny Spider and Metalmickey 2 Quote Link to comment Share on other sites More sharing options...
Spider Posted December 17, 2017 Author Report Share Posted December 17, 2017 The only other idea I had was to export each part of the data separately, ie: rooms , sprites etc then import them into a new 'empty' game of the same 'variant' although that seems a bit of a drastic step. :) Hopefully Danny will be able to assist you with a 'repair' if you take up his offer. jetsetdanny and Metalmickey 2 Quote Link to comment Share on other sites More sharing options...
Metalmickey Posted December 17, 2017 Report Share Posted December 17, 2017 think i know what the problem is, i'm using my own modified version of JSW where i fixed the conveyors by putting in the modified code in an alternative location to where Skoolkid originally suggested .. think i might need to relocate it elsewhere Spider 1 Quote Link to comment Share on other sites More sharing options...
Spider Posted December 17, 2017 Author Report Share Posted December 17, 2017 think i know what the problem is, i'm using my own modified version of JSW where i fixed the conveyors by putting in the modified code in an alternative location to where Skoolkid originally suggested .. think i might need to relocate it elsewhere Sounds a promising idea/thought. :) As daft as it sounds (sorry!) always take and then work on a copy to make changes, the amount of 'issues' I've created for myself (not JSW just generally) with thinking ' its fine ' and then finding out its not after.. :lol: :unsure: Metalmickey, IRF and jetsetdanny 3 Quote Link to comment Share on other sites More sharing options...
andrewbroad Posted December 23, 2019 Report Share Posted December 23, 2019 (edited) Single-cell ramps In Message 4969 of the Manic Miner and Jet Set Willy Yahoo! Group (2005-10-22), I wrote:"JSWED should allow you to grow a ramp or conveyor off the vertical edges of the screen (but should not allow you to grow a ramp off the top of the screen). I like to exploit wraparound ramps and conveyors in my games, so of all my suggestions, this should be one of the highest priorities."I'm now trying to put a single-cell '\' ramp in the leftmost column of a certain room in a JSW48 game, but JSWED won't let me do it. It seems that the only way to make a single-cell ramp is to grow it to two cells and then shrink it back to one, and JSWED won't let me grow it off the left edge of the screen.The same applies, mutatis mutandis, to trying to put a single-cell '/' ramp in the rightmost column.Don't get excited: I'm not planning to release a new game anytime soon. Edited December 23, 2019 by andrewbroad Spider 1 Quote Link to comment Share on other sites More sharing options...
jetsetdanny Posted December 23, 2019 Report Share Posted December 23, 2019 I would "like" this message were it not for the last sentence :o Spider 1 Quote Link to comment Share on other sites More sharing options...
Spider Posted December 23, 2019 Author Report Share Posted December 23, 2019 Well that would possibly depend on a definition of "soon" perhaps. :) jetsetdanny 1 Quote Link to comment Share on other sites More sharing options...
andrewbroad Posted December 23, 2019 Report Share Posted December 23, 2019 "Soon" would be within the next twenty years, if I will always be as busy as I have been in the last decade. I ended up using my own Jet Set Willy Construction Kit (JSW CK) in the RealSpec emulator to add my ramp, followed by SPECSAISIE's Split function and my Java Cat program to reconstitute the TAP file. Spider and jetsetdanny 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.